WGFU series ultrasonic flowmeter

■ General

WGFU series ultrasonic flowmeter is based on the principle of "velocity difference method" to measure the flow of clean and uniform liquid without high concentration suspended particles in the pipe. It adopts advanced multi pulse technology, digital signal processing technology and error correction technology, so that the flow meter can adapt to the environment of industrial site more easily, economically and accurately. The products have reached the advanced level at home and abroad, and can be widely used in petroleum, chemical industry, metallurgy, electric power, water supply and drainage and other fields.

Measuring principle: When the ultrasonic beam propagates in the liquid, the flow of the liquid will cause a slight change in the propagation time, which is proportional to the flow rate of the liquid. When the flow is zero, the time required for the two sensors to transmit and receive sound waves is exactly the same (only the technology that can actually measure the zero flow). When the liquid flows, the sound wave transmission time in the countercurrent direction is greater than that in the downstream direction.

■ Product characteristics

● Large measurement range, different types of sensors are selected to measure the flow of DN15~DN6000mm pipes

● High reliability, low voltage, multi pulse transmission circuit, high measurement accuracy, service life and reliability

● Strong anti-interference capability, double balanced signal differential transmitting and receiving circuits are used to effectively resist strong interference sources such as frequency converter, TV tower and high-voltage line

● The measurement accuracy is ± 1%, the linearity is better than 0.5%, and the repeatability accuracy is better than 0.2%

● 2-circuit 3-wire PT100 resistance signal input can be used as heat meter

● With two-way isolated programmable 0CT output, used to output accumulated pulse, working state, etc

● Powerful memory function, with daily and monthly accumulation function, and the accumulated data can be read out through MODBUS protocol

● The sensor can be of external clamp type, plug-in type and pipe section type, which is convenient for users to select and use

● It is independent of pipe diameter, easy to install, no need to stop production, no pressure loss, etc

■ Model Selection

■ Technical parameters