WGLUS integrated ultrasonic level meter

■ General

WGLUS type -- integrated ultrasonic level gauge is used for continuous detection of liquid level and volume of liquid and slurry materials in open or closed containers, and also for open channel flow measurement, with a large range of up to 12 meters.

The working principle of the ultrasonic level gauge is that the ultrasonic pulse sent by the transducer (probe) is reflected back when encountering the surface of the measured medium, and part of the reflected echo is received by the same transducer and converted into electrical signals. The ultrasonic pulse propagates at the speed of sound wave. The time interval required from transmission to receiving the ultrasonic pulse is proportional to the distance from the transducer to the surface of the measured medium. The relationship between the distance value s and the sound speed C and the transmission time T can be expressed by the formula:

S=CXT/2

■ Product characteristics

● Continuous liquid level measurement, measuring range up to 12 m

● Easy to install and start

● Programming via infrared intrinsically safe hand-held programmer, SIMATIC PDM or HART ⑧ manual operator

● Unique high precision

● Communication using HART or PROFIBUS PA

● ETFE or PVDF sensors have strong chemical corrosion resistance

● Very high signal-to-noise ratio

● Automatic false echo suppression for fixed jamming targets

● Level to volume or level to flow conversion

■ Technical parameters

● Range: 6m type 0.25~6m; 12m type 0.25~12m

● Measurement accuracy: ± 0.15% (full scale)

● Resolution: ≤ 3mm

● Repeatability: ≤ 3mm

● Blind zone: 0.25m

● Frequency range: 54KHz

● Emission angle: 10 °

● Power supply: two-wire DC24V

● Process temperature: - 40~85C

● Process pressure: - 0.2~0.05MPa

● Cable inlet: M20X1.5

● Shell material: PBT (polybutylene terephthalate)

● Process connection: 2 "NPT, 2" BSP, 2'G

● Probe material: ETFE or PVDF

● Display: LCD with bar graph

■ Model Selection