WGS-C series dust monitor

■ General

WGS-C series dust monitor is mainly used for online measurement under the following working conditions:

● Bag damage monitoring (WGS-C1)

● Trend monitoring and tracking (WGS-C3)

● Dust concentration measurement (WGS - C4/C5)

■ Technical parameters

● Measuring medium: suspended solids in the air stream

● Dust particles: 0.3 μ M or more

● Measurement range: 0.1mg/m °~1kg/m

● Accuracy: ± 5% of measured value

● Process conditions: temperature: 300 ° C (standard)/400-800 ° C (optional)

Pressure: 200 kPa (standard)/up to 6 MPa (optional)

Flue gas velocity: minimum 4 m/s

Humidity: 95% RH or less (non condensing)

● Input voltage impulse: z greater than 100 V

● Damping time: 10 to 180 seconds

● Output signal: isolation 4-20mA (C3/C4/C5); Relay 5 A, 24 V AC or DC; RS232/485 interface (C4/C5)

● Environmental conditions: temperature - 20~+45 ° C; Humidity 95% RH or less (non condensing); Vibration 5m/S or less

● Material: probe: 316 stainless steel; Probe insulation: Teflon (high temperature: PEEK or ceramic); Shell: die-casting aluminum

● Power supply and power: 115 VAC/230 VAC, 50/60Hz; Power 3 W

● Electrical interface: DIN PG11 power line: DIN PG11 signal line.

● Weight: 2.3 kg

● Alarm setting selection: automatic setting of alarm value (two setting methods), factory setting (depending on the average measured value)

● Explosion proof: sensor intrinsically safe explosion-proof EExiaIICT6, transmitter EExdIIBT6.