WGLC series admittance level meter

■ General

WGLC series admittance level meter adopts RF signal to measure material level change. Its unique shielding technology completely solves the drift and misoperation caused by probe hanging, working condition temperature and pressure change. The instrument works stably and reliably.

The LTLC series admittance level meter consists of a probe, an electronic unit and a protective housing, which can be installed in an integral or split way. It is used for limit control of various liquids, pastes, solid particles or powders, and its output is a double pole double throw relay contact signal.

■ Product characteristics

● Maintenance free: no mechanical wear parts, no need for regular maintenance or replacement

● Anti hanging material: the design of shielding technology in the circuit enables the instrument to ignore the influence of probe hanging material, without regular cleaning or repeated calibration

● Wide application: can measure liquid, slurry, solid particles and powder

● Simple installation: it can be installed through the thread or flange on the tank, and the overall or split installation mode can be selected. The commissioning is simple and convenient

■ Technical specifications

● Power supply: AC80V~265V 2W or DC15V~30V 2W

● Output: double pole double throw relay switch signal (high position action or low position action can be set on site)

● Contact capacity: AC220V 5A non inductive, 3A inductive

● Sensitivity: 0.3PF

● Alarm delay time: 2~25 seconds continuously adjustable

● Repeatability: 1.6 mm for conductive materials; Insulation material 50mm

● Ambient temperature: - 40 ° C~85C

Probe material: 1Cr18Ni9Ti

● Probe length: 500mm (standard)

● Split cable: special signal cable, 5m long (standard), 20m long at most

● Process connection: 3/4NPT threaded installation (standard), or flange installation

● Enclosure protection: IP65

● Explosion proof grade: ExdIIBT4

● Detection pole:

■ Model Selection

■ Ordering instructions

● Select the correct type according to the silo shape, installation position, installation method, insertion depth, etc

● Provide site conditions as much as possible, and we will help you make the right choice. For example, the name, density, particle size, toxicity, temperature, flammability and explosiveness of the tested material, pressure, shape, material, wall thickness, testing location, and feeding and discharging methods of the container

● The split probe can be used at high temperature. The connecting cable between the probe and the electronic unit is a special cable. Please determine the length according to the site needs. (If the user has no special requirements, the factory standard length of the instrument is 5 meters)

The spot products we provide are all conventional products, which can be specially customized if there are special needs. Such as: unconventional installation methods, special materials, higher technical requirements or performance, etc.